CHECK OUT OUR SELECTION OF PREPARED BUGEYES (AND NON-BUGEYES) FOR SALE BELOW!

Why you need this Bugeye Sprite accessory

Here’s a brand new add-on accessory is a must for every Spridget with a bottom hinging gas pedal. Here’s why…

Original Bugeye accelerator pedals are a terrible design. They plug into a pivoting metal rod and can easily become un-plugged while driving, which is an obvious safety hazard. Once the pedal disconnects, It’s not difficult to lodge the rubber pedal on the accelerator rod, thus sticking the throttle OPEN!

The other challenge with this original design is the hinge mount requires two holes in your nice floor pan. Since it is naturally rusting and making holes on its own, it’s never fun to punch more holes if you don’t have to. Those accelerator holes can become yet another source of corrosion.

Since about 1979 I have been driving my Bugeye ‘Gumby” with just metal bar under my foot and no pedal. And on the cars the we ship to customers, we remove the pedal for safety. Even though it doesn’t look pretty, the bar has been our best solution, until now.

We are exited to offer a nice cast aluminum pad you can easily bolt into place, along with a rubber pedal pad to cover it. This is an elegant solution to an old problem. It’s easy to install and makes heel/toe shifting easy. This is an upgrade that is a winner for every early Sprite!

You get the aluminum bolt on pad, hardware to mount it and a rubber pedal pad, which you will need to install on the aluminum pad before installation.

Order one by clicking here…